You are here:

1. Technical Documentation

General Information

 Name and address of the manufacturer

Name: Suzhou South Large Battery Co., Ltd    

Address: No. 16, Loushang Rd, East Jinling Rd, Weiting Town, Suzhou Industrial Park    

CategoryPortable non-rechargeable alkaline battery & dry battery

Product Name 1: Alkaline Manganese Dioxide-Zinc Battery

Common Name: Alkaline Battery

Model: LR03, LR6, LR14, LR20, 6LR61, LR1

Nominal Capacity: LR03(1.5V/1200mah), LR6(1.5V/2500mah), LR14(1.5V/5900mah), LR20(1.5V/9800mah), 6LR61(9V/620mah), LR1(1.5V/600mah)

 Product Name 2: Carbon-Zinc Battery

Common Name: Dry Battery

Model: R03, R6P, R14P, R20P, 6F22, 4R25

Nominal Capacity: LR03(1.5V/300mah), R6P(1.5V/700mah), R14P(1.5V/1400mah), R20(1.5V/2500mah), 6R22(9V/200mah), 4R25(6V/7000mah)

 Material:

Alkaline battery: Manganese Dioxide (MnO2), Zinc (Zn), Potassium Hydroxide (KOH), Iron, Graphite, copper, water.

Carbon zinc battery: Manganese Dioxide (MnO2), Zinc (Zn), Carbon Rod, Acetylene Black, Zinc Chloride, Ammonium Chloride, Paper, Iron, Graphite, Asphalt Water.

Content of hazardous substances: Mercury free, Cadmium free, lead free.

 Related Laws, regulations, Standards:

EU Battery Regulation 2023/1542, EC REACH Regulation (EC 1907/2006), PPWR(EU 2025/40). RoHS 2.0, IEC60086-1,2,3.

Suitable extinguishing media: Carbon dioxide, foam, dry chemical powder.

Guide for use

Installation:

Before inserting batteries into the battery compartment of the equipment, the contacts of both equipment and batteries should be checked for cleanliness and correct positioning. If necessary, clean with a damp cloth and dry before inserting.

It is of extreme importance that batteries are inserted correctly with regard to polarity (+ and -). Follow equipment instructions carefully and use the recommended batteries. Failure to follow

the instructions, which should be available with the equipment, can result in malfunction and damage of the equipment and/or batteries.

Use:

It is not good practice to use or leave equipment exposed to extreme conditions, for example

radiators, or cars parked in the sun, etc.

It is advantageous to remove batteries immediately from equipment which has ceased to function satisfactorily, or when not in use for a long period (e.g. cameras, photoflash, etc.).

Be sure to switch off the equipment after use.

Store batteries in a cool, dry place and out of direct sunlight.

Replacement

Replace all batteries of a set at the same time. Newly purchased batteries should not be mixed with partially exhausted ones. Batteries of different electrochemical systems, grades or brands should not be mixed. Failure to observe these precautions may result in some batteries in a set being driven beyond their normal exhaustion point and thus increase the probability of leakage.

Disposal

Primary batteries may be disposed of via the communal refuse arrangements, provided no

contrary local legal requirements exist. Refer to IEC 60086-5 for further details.

图片1.jpg

2. CE certification passing documents

695.jpg